Alcatel Advanced Reflexes - Parking a Call; To Park a Call; To Recover Your Parked Call at the Destination Station

PPaarrkkiinngg aa ccaallll
You can park an external call in order to retrieve the call at a different terminal.
To park a call:
(1) During the call,
(2) Per the voice guide, dial the station number of the terminal on which you want
to take the call - the call is automatically parked, and your caller hears a hold
signal.
Note: If you hang up without specifying a destination, the parked call remains at the original
station, and can be recovered using the Park Call/Retrieve feature in the normal fashion at
the original station (or at any other station within the system).
To recover your parked call at the destination station:
Enter the code for the
""PPaarrkk CCaallll//rreettrriieevvee""
feature,
or
Access the service feature group
""CCaallll ppiicckkuupp sseerrvviicceess""
and apply
PPaarrkkeedd
.
To recover your parked call at any other station in the system:
(1) Enter the code for the
""PPaarrkk CCaallll//rreettrriieevvee""
feature,
or
Access the service feature group
""CCaallll ppiicckkuupp sseerrvviicceess""
and apply
PPaarrkkeedd
.
(2) Dial the extension number where the call was parked.
Note: If a call is parked for more than the predefined period of time, it is automatically sent
to the attendant or other designated number within the system.
Park
26