24
To transfer a call from the Bluetooth headset back to the handset:
• Press OPTION, then press
or to select Use handset and press
SELECT.
To end a call that started at the handset:
• Press
or put the handset in the telephone base or charger.
Note:
• If you are using a headset for a call which is transferred from Alcatel XP
1050 handset, and you lose the Bluetooth connection or the battery of the
headset is depleted, the call is transferred back to the originating handset.
4.4. Make a Call
4.4.1. Makeaxedlinecall
4.4.1.1. Preparatory Dialing
Enter the phone number and press
or to dial the number. Press
to clear
the entry.
4.4.1.2. Direct Dialing
Press
or to take the line and enter the phone number.
4.4.2. Make a Mobile Call
You can connect a maximum of 2 Bluetooth enabled mobile phones to the
telephone base, but only one mobile phone can be used on a mobile call at a
time.
4.4.2.1. Preparatory Dialing
Enter the phone number and press
to dial the number. Press
to clear the
entry.
4.4.2.2. Direct Dialing
Press
, then enter the phone number, then press DIAL.
Note:
If you have two mobile phones connected to the telephone base, the telephone
system prompts you to select a mobile phone before you make a mobile call.
4.5. Answer a Call
4.5.1. Answer a fixed call or mobile call
If the handset is not on the charging cradle:
•
When the phone rings, press
or to answer a fixed line call, or, press to
answer a mobile call.
If the handset is on the charging cradle or the base station and if AUTO ANSWER
To Next Page
Loading...
