Alcatel XP1050 - Find the Handset; Conference Fixed Line and Mobile Calls

27
• Mobile
• Work
• Other
6. Press NEXT. The handset displays ENTER NAME.
7. Press SAVE and then Saved displays. You hear a conrmation tone.
4.10.4. Delete a redial entry
1. Repeat step 1 and 2 in last section.
2. Press
to delete the displayed number. You hear a conrmation tone.
4.11. Find the Handset
You can locate the handset by pressing
on the base station.
All the handsets registered to the base will produce the paging tone and “Paging”
is displayed on the LCD. You can stop the paging by pressing
, , , ,
on any handset or
on the base again.
Note: If there is an incoming call during paging, the phone will ring with the
incoming call instead of paging.
4.12. Conference Fixed Line and Mobile Calls
When you have calls established on the fixed and mobile lines, you can create a
3-way conference.
1. Press OPTION.
2. Press
or to select Conference.
3. Press SELECT. The screen displays Lines now in conference.
To select an option while on a conference call:
1. Press OPTION.
2. Press
or to select one of the following options:
• End Home line
• End Mobile line
• End Conference
• Phonebook
• Call log
3. Press SELECT.
To end a conference call:
• Press
or put the handset back in the telephone base or charger.
OR
• Press OPTION, then press
or to select End Conference. Press
SELECT to end the conference.
Using the fixed and mobile lines together: You can be on two different calls
using the mobile line and fixed line at the same time using two handsets.