36
6 Phone Settings
6.1 Set Ringer Volume
1. Press MENU on the handset in idle mode.
2. Press
or to select Ringers,
3. Press SELECT to choose Ringer volume.
4. Press
or to select All lines, Home, Mobile-D1 or Mobile-D2, then
press SELECT.
5. Press
or to adjust the ringer volume. You hear a sample of each
volume level while adjusting.
6. Press SET to save. You hear a confirmation tone.
OR
Press OFF to turn off the ringer, then press SET to save. The handset
displays Caller ID won’t be announced. You hear a confirmation tone.
Note:
• When the ringer volume for all calls (fixed line and mobile) is set to off, a
icon appears steady. When only one or two of the ringer volume settings
are set to off, a
icon flashes.
6.2. Set Ringer Melody
1. Repeat step 1 and 2 in last section.
2. Press
or to select Ringer tone, then press SELECT.
3. Press
or to select All lines, Home, Mobile-D1 or Mobile-D2, then
press SELECT.
4. Press
or to select the desired ringer melody.
5. Press SET to save your preference. You hear a confirmation tone.
6.3. Set Alert Tone
You can turn on the alert tone when low battery/out of range is detected.
1. Repeat step 1 and 2 in last section.
2. Press
or to select Low battery or No coverage, then press SELECT.
3. Press
or to select On or Off, then press SELECT. You hear a
confirmation tone.
6.4. Set Date and Time
To set the date and time
1. Press MENU on the handset in idle mode.
2. Press
or to select Set date/time, then press SELECT.
3. Press
or to select the day, month and year, then press SET.
4. Press
or to select the hour and minutes, then press SET.
Note:
If the date and time are not set when a message is recorded, the system
announces, “Time and day not set,” before each message plays.
To Next Page
Loading...
