www.aleratec.com
5
Precautions
Before installing your HDD Copy Cruiser High-Speed WL, please read the
following.
Installation
Avoid placing the HDD Copy Cruiser High-Speed WL in a location subject to:
• High humidity
• High temperature
• Excessive dust
• Mechanical vibration
• Direct sunlight
• Electromagnetic radiation
Power
This product has two auto switching PSUs.
Choose a Good Location
1. Allow adequate clearance for moving parts.
2. Do not place near heat sources such as radiators or air ducts, or in a place
subject to direct sunlight, excessive dust, mechanical vibration or shock.
3. Disconnect the AC power cord from the outlet if the product is not used for an
extended period of time.
4. Proper care will help assure maximum product life. Improper operating
environment and misuse may void the warranty.
Operation
Do not move the HDD Copy Cruiser High-Speed WL during operation. This may
cause a malfunction or other undesirable results.
Avoid exposing the unit to sudden changes in temperature as condensation may form
inside the HDD Copy Cruiser High-Speed WL. Should the surrounding temperature
suddenly rise while the HDD Copy Cruiser High-Speed WL is on, wait at least one
hour before turning off the power. Operating the duplicator immediately after a
sudden increase in temperature may result in a malfunction.
Transportation
Keep the original packing materials for future moving or shipping of the HDD Copy
Cruiser High-Speed WL. Replacement packaging may incur charge.
To Next Page
Loading...
