www.aleratec.com
41
Using the HDD Copy Cruiser High-Speed WL
Main Menu
Log Manager
This function will allow you to access the Log Manager’s password protected
Advanced Functions.
1. With the source and target HDDs loaded use the arrow buttons (or) to
select “Log Manager”. The following screen will be displayed.
2. Press OK to select. The following information will be displayed. Press OK
again to access the Advanced Function menu.
3. You will be prompted to enter a password. Select characters by pressing the
arrow buttons (or). Press to scroll through numbers rst. Press to
scroll through letters rst. Press OK to move to the next character.
Note: The default password is 123456
ESC
OK
2014/10/07 09:50
7. Log Manager
ESC
OK
[ Log #1 - #32 ]
1. Advanced Function
ESC
OK
Enter Password
=> _
To Next Page
Loading...
