ALERTON MICROSET 4 - Page 31

© Honeywell LT-MS4IOG Rev. 04 | Revised October 2015
31
INSTALLATION & OPERATIONS GUIDE | MICROSET 4
Fan speed mode
Humidity Screen
Press the up or down
arrows to increase or
decrease the fan speed.
(If any value other than
HIGH is selected, the
up arrow will be visible.)
Fan Speed screen
is active.
FAN
MEDIUM
LOW
AUTO
CO
2
HIGH
Current fan speed value.
HUMIDITY
93%RH
72
CO
2
%
RH
Humidity screen
is active.
Press the left arrow to move
to the previous screen.
Press the right arrow to move
to the next screen.
Current outside humidity.
Current inside humidity.