13
THRESHOLD
False triggering occurs when a trigger is engaged accidentally, often due to stage
vibrations. The Threshold setting helps prevent false triggering. The threshold value
is the minimum velocity needed to be registered for the trigger to output data. This
Threshold should be set based on your playing style. Try different Threshold settings
until you find one that works best for you.
How to change trigger Threshold:
1. Select the trigger you would like to edit by striking the trigger/pad.
2. Use the function up/down buttons to select Threshold.
3. Use the value up/down buttons to dial in the desired Threshold value. The
value will be loaded automatically.
REMEMBER TO SAVE YOUR CHANGES BY GOING BACK TO KIT!
To Next Page
Loading...
