Alfa Laval Copenhagen A/S
ALF – Installation, Operating and Safety Manual
ALF Instruction Manual UM_Filter_100B03
Page 9 of 67
4. Installation
4.1 Guidelines
For details on Dimensions, Connections, Loads, Service area, etc.: See the
order specific dimension drawing.
The ALF filter is either a complete machine or a partly completed machine
depending of what components the ordered filter consist of.
NOTE
It is the responsibility of the party that commissions/installs the filter to ensure
that the instructions given on the declaration of incorporation/ declaration of
conformity are followed prior to the first startup of the filter.
All electrical installations must be done in accordance with local regulations. A
certified electrician should carry out this job.
During working on the electrical installations the main power supply must be shut
off at all times.
For all signal cabling it is recommended to use screened cables only.
WARNING
Emergency stop must be installed as per local regulations.
4.2 Unpacking
When unpacking, take care not to damage the filter
Make sure that the ALF filter has not been damaged during the transport.
If transport damages are found, please contact local Alfa Laval agent.
To Next Page
Loading...
Need help?
General
