Notice
During a download/update:
DO NOT unplug the Usb cable
DO NOT turn off your computer
The time taken to download updates may vary depending on your Internet
connection and traffic on the band of Alientech Data Bank.
Updating the K-Suite software and KESSv2
If your computer is connected to the Internet, when launched the K-Suite software automatically
searches for available software updates. To update the K-Suite software and download any new
protocols published:
1. Connect the KESSv2 to your computer using the supplied USB cable.
2. Start the K-Suite software and do not press SKIP on the loading screen of the software.
3. Follow any onscreen instructions.
4. Wait until the update is complete.
K-Suite software updates distributed by Alientech Srl can be downloaded free of charge from any
owner of KESSv2.
Updates of protocols enabled at the purchase of the tool can be downloaded free of charge from
any owner of KESSv2, while receiving new protocols developed and distributed by Alientech Srl is
subject to a subscription.
To Next Page
Loading...