AlienTech KESSV2 Slave - Additional Information; Optional Accessories

35
Version 1.01
Additional information
Optional accessories
Not all vehicles are equipped with OBDII standard connector. For this reason Alientech Srl provides
special wiring depending on the vehicle to be programmed.
Never use cables or accessories manufactured by companies other than Alientech
Srl.
 Plug-in Tricore
To program on bench BOSCH EDC17/MED17 ECUs equipped with Infineon Tricore
microprocessors.
14P600BTLR
Infineon Tricore Module
14P600KT02
Tricore cable
14P600KT03
Flat cable for board adapter 14P600KT04
14P600KT04
Board adapter for positioning frame
14P800ADBO
Positioning frame
 Car cables
Cables for cars not equipped with standard diagnostic connectors.
144300K202
20 pin Diagnostic Connector Cable - BMW
144300K203
38 pin Diagnostic Connector Cable - Mercedes
144300K204
38 pin Diagnostic ECU Connector Cable for BOSCH ECU
(ME7.3.1/ME3.1/ME2.1/ME7.3H4) Fiat – Alfa – Lancia
144300K205
OBD Connector Cable for BOSCH ECU (ME5.2.2) - Porsche
144300K206
ECU Connector Cable for BOSCH ECU (EDC15) Audi – Seat – Skoda – VW
144300K239
Double Diagnostic Connector Cable - Mitsubishi
144300K240
Diagnostic Connector Cable and Jumpers - Subaru
144300K250
OBDII Cable for Lotus
 Bike cables
Cables for motorbikes not equipped with standard diagnostic connectors.
144300K241
OBD Connector Cable for Marelli ECU - Ducati – Aprilia – Gilera – MV
Augusta
144300K243
OBD Connector Cable for BOSCH BMSK ECU - BMW Motorcycles
144300K244
OBD Connector Cable for ECU Siemens VDO and Melco Mitsubishi