AlienTech KESSV2 Slave - Choosing Family via EXTRAS Button

To Next Page

To Previous Page

Version 1.01

How to choose a Family using the EXTRAS button

EXTRAS button

1 Select the communication mode in which you want to program (Bootloader Tricore,

Bootloader ST10Fxxx, OBDII).

2 Select the type of ECU.

For the OBDII mode, use the cable proposed in the Operating Manuals of the

selected Family. For the Tricore Mode, you need to use the Infineon Tricore

Module (sold separately), while for the ST mode you can use either the K4 cable or

the Infineon Tricore Module.