Allen-Bradley 1734-SSI - Work with the Input Registration Dialog

Rockwell Automation Publication 1734-UM007E-EN-P - October 2015 41
Configure Modules in RSLogix 5000 Software Appendix A
Work with the Input
Registration Dialog
Follow these procedures to complete the Input Registration dialog.
1. From the General dialog, click Input Registration to display the dialog.
2. From the Input Registration dialog for Input Latch select one of these,
with Off being the default.
• Off
• Off-to-On
• On-to-Off
• Both Edges
3. From the Input Registration dialog, complete one of these.
• Click OK to save changes and close the dialog.
or
• Click Cancel to return to default values.
or
• Click Apply to save changes you made on any of the dialogs and
continue to display the dialog, noting that you enable the Apply button
when you make changes to any of the dialogs.
or
• Click another tab at the top of dialog.