Allen-Bradley 1734-SSI - Preface; Purpose of This Manual; Who Should Use This Manual; Additional Resources

Rockwell Automation Publication 1734-UM007E-EN-P - October 2015 7
Preface
Purpose of This Manual
Read this manual for information about how to install, configure, and
troubleshoot your module.
Who Should Use This Manual
You must be able to use RSNetWorx software or similar configuration software
to set up and calibrate these modules. You must have the capability to download
and use electronic data sheet files.
In this manual, we assume you know how to perform these tasks. If you do not,
refer to your software user manuals or online help before attempting to use these
modules.
Additional Resources
For specification, safety approval, and other information, refer to POINT I/O
Synchronous Serial Interface Absolute Encoder Module Installation Instructions,
publication 1734-IN581
.
These documents contain additional information concerning related products
from Rockwell Automation.
For This Information See
Install the Module Chapter 1
Configure the Module Chapter 2
Communicate with Your Module Chapter 3
Set and Operate Your Module Chapter 4
Diagnose Problems Chapter 5
Configure Modules in RSLogix 5000 software Appendix A
Description Cat. No. Publication
Analog Input Modules
Installation Instructions
1734-IE2C
17340IE2V
1734-IN027
Analog Output Modules
Installation Instructions
1734-OE2C
1734-OE2V
1734-IN002
DeviceNet Communication Interface
Installation Instructions
1734-PDN 1734-IN057
Field Potential Distributor
Installation Instructions
1734-FPD 1734-IN059
POINT I/O 24V DC Expansion Power Supply
Installation Instructions
1734-EP24DC 1734-IN058
POINT I/O Selection Guide 1734 series 1734-SG001
Protected Output Modules
Installation Instructions
1734-OB2E
1734-OB4E
1734-OB8E
1734-IN056
Relay Output Modules
Installation Instructions
1734-OW2
1734-OW4
1734-IN055
Sink Input Modules
Installation Instructions
1734-IB2
1734-IB4
1734-IB8
1734-IN051