80 Rockwell Automation Publication 1756-RM093J-EN-P - April 2018
Appendix B Safety Add-On Instructions
Project Verification Test
Perform an engineering test of the application, including the safety system.
See
Functional Verification Tests on page 12 and Project Verification Test on
page 56 for more information on requirements.
Safety Validate Project
An independent, third-party review of the safety system may be required before
the system is approved for operation. An independent, third-party validation is
required for IEC 61508 SIL 3.
Additional Resources
For more information on using Add-On Instructions, refer to these publications.
Resource Description
Logix5000 Controllers Add-On Instructions Programming
Manual, publication 1756-PM010
Provides information on planning, creating, using,
importing and exporting Add-On Instructions in
RSLogix 5000 applications
Import/Export Project Components Programming
Manual, publication 1756-PM019
Contains detailed information on importing and
exporting
To Next Page
Loading...
