Rockwell Automation Publication CC-QS038A-EN-P - August 2015 23
System Validation Chapter 2
To modify the settings for the project that are generated from CCAT version 2 or the project
Starting_CR30_M800_r8 downloaded from the Rockwell Automation® sample code website
, follow these steps.
2. From the project organizer, open the local variables of <device name> M800_CR30_Sts.
3. Search for Channel in local variable list.
4. Update the initial value of the variable to the channel number of your serial communication port regarding the port
location. In this example, we use the embedded serial communication port (channel 2).
Channel 2 Channel 5 Channel 6 Channel 7
To Next Page
Loading...
