24 Rockwell Automation Publication CC-QS038A-EN-P - August 2015
Chapter 2 System Validation
5. In your Connected Components Workbench project, from the Project Organizer, right-click your controller icon
and choose Build.
6. When the program is finished building, check the Output pane at the bottom of your project window for a build
success message.
Example Output Pane: Build Successful
If the build is successful, continue to step 7.
If the build is unsuccessful, an errors list appears. Continue to step a
.
Example Output Pane: Error List
a. Double-click an error description to go to that error.
b. Correct each error.
c. Repeat step 2
…step 6 until the build is successful and continue to step 7.
7. From the Project Organizer, right-click your controller icon and choose Download.
To Next Page
Loading...
