252 Rockwell Automation Publication 2198-UM002G-EN-P - February 2019
Chapter 6 Configure and Start the Kinetix 5700 Drive System
14. Select the Scaling category and edit the default values as appropriate for
your application.
15. Click Apply, if you make changes.
16. Select the Actions category.
The Actions to Take Upon Conditions dialog box appears.
From this dialog box, you can program actions and change the action for
exceptions (faults). Refer to Logix 5000 Controller and Drive Module
Behavior on page 283 for more information.
17. Select the Parameter List category.
To Next Page
Loading...
