MicroLogix 1200 Analog Output Module 19
Publication 1762-IN016B-EN-P - December 2005
Additional Resources
Certifications
Certification Value
Agency Certification C-UL certified (under CSA C22.2 No. 142)
UL 508 listed
CE compliant for all applicable directives
C-Tick marked for all applicable acts
Hazardous Environment Class Class I, Division 2, Hazardous Location, Groups A, B,
C, D (UL 1604, C-UL under CSA C22.2 No. 213)
Noise Immunity NEMA standard ICS 2-230
Radiated and Conducted Emissions EN50081-2 Class A
Electrical /EMC: The module has passed testing at the following
levels:
ESD Immunity (EN61000-4-2) 4 kV contact, 8 kV air, 4 kV indirect
Radiated Immunity (EN61000-4-3) 10 V/m, 80 to 1000 MHz, 80% amplitude modulation,
+900 MHz keyed carrier
Fast Transient Burst (EN61000-4-4) 2 kV, 5 kHz
Surge Immunity (EN61000-4-5) 1 kV galvanic gun
Conducted Immunity (EN61000-4-6)
10V, 0.15 to 80 MHz
(1)
(1) Conducted Immunity frequency range may be 150 kHz to 30 MHz if the Radiated Immunity frequency range is 30 MHz to
1000 MHz.
For Refer to this Publication
Information on installing, wiring, and operating a
MicroLogix 1200 Programmable Controller
MicroLogix 1200 Programmable Controllers User
Manual, 1762-UM001
Installation guide for the MicroLogix 1200
Programmable Controller.
MicroLogix 1200 Programmable Controllers
Installation Instructions, 1762-IN006
Installation guide for the MicroLogix 1200 Memory
Module and Real Time clock.
MicroLogix 1200 Memory Module and/or Real Time
Clock Installation Instructions, 1762-IN001
More information on proper wiring and grounding
techniques.
Industrial Automation Wiring and Grounding
Guidelines, 1770-4.1
To Next Page
Loading...
Need help?
General
