Rockwell Automation Publication 750-PM001N-EN-P - February 2017 19
Chapter 2
Parameter Organization
This chapter lists and describes the PowerFlex® 750-Series Port 0 drive
parameters. The parameters can be programmed (viewed/edited) using a Human
Interface Module (HIM). Refer to Enhanced PowerFlex 7-Class Human
Interface Module (HIM) User Manual, publication 20HIM-UM001
, for
information on using the HIM to view and edit parameters. As an alternative,
programming can also be performed using DriveTools™ software and a personal
computer.
Topic Page
About Parameters 20
Parameter Access Level 21
How Drive Parameters are Organized 22
How Option Module Parameters are Organized 42
To Next Page
Loading...
