Rockwell Automation Publication 750-PM001N-EN-P - February 2017 265
Embedded Feature and Option Module Parameters Chapter 5
Single Incremental Encoder
7Phase Loss Count
Phase Loss Count
Displays the total number of encoder errors detected by the encoder card every 1
millisecond sample interval. These values are reset to zero every 1 millisecond.
Diagnostic Items are available for the encoder that show the errors counted over 8
milliseconds as well as the peak error values. The peak values are reset when the drive
faults are cleared.
Default:
Min/Max:
0
0 / 127
RO Real
8 Quad Loss Count
Displays the total number of encoder errors detected by the encoder card every 1
millisecond sample interval. These values are reset to zero every 1 millisecond.
Diagnostic Items are available for the encoder that show the errors counted over 8
milliseconds as well as the peak error values. The peak values are reset when the drive
faults are cleared.
Default:
Min/Max:
0
0 / 15
RO Real
File
Group
No. Display Name
Full Name
Description
Values
Read-Write
Data Type
To Next Page
Loading...
