512 Rockwell Automation Publication 750-PM001N-EN-P - February 2017
Appendix F Integrated Motion on EtherNet/IP Application
3. In the Module Properties dialog box for the drive, on the Digital Outputs
tab, select the appropriate digital output functions.
Configure 20-bit or 24-bit Motor Feedback Device Resolution
You can configure 20-bit or 24-bit effective resolution for the following feedback
devices:
• Hiperface
• Heidenhain SC
• SSI SC
Set the desired effective resolution on the Motor Feedback tab of the Axis
Properties dialog box for the axis associated with the drive. This feature is
available in PowerFlex 755 firmware revision 12.001 and later and Studio 5000
Logix Designer® version 28.00.02 or later.
To Next Page
Loading...
Need help?
General
