Name: Allied Telesis AT-GS950/8
Brand: Allied Telesis
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Chapter 15: MAC Address Table

218

Modify Static Unicast Address

To modify the port assignment of a unicast MAC address in the MAC

address table, perform the following procedure:

1. From the main menu on the left side of the page, select the Bridge

folder.

2. From the Bridge folder, select Static Unicast.

The Static Unicast Address Table Page is displayed. See Figure 81 on

page 216.

3. Select Modify next to the static MAC address that you want to change.

The Modify Static Unicast Address Page is displayed (not shown

here).

4. In the Group Member row, select the check boxes for the ports that

you want to include or remove in the Group Member area. Selected

ports are indicated with a check mark.

Note

To restore the original group member ports, click Restore.

5. Click Apply.

6. From the main menu on the left side of the page, select Save

Configuration to Flash to permanently save your changes.

Other manuals for Allied Telesis AT-GS950/8

Questions and Answers:

Need help?

Do you have a question about the Allied Telesis AT-GS950/8 and is the answer not in the manual?

General