EasyManuals Logo

Allied Telesis AT-GS950/8 User Manual

Allied Telesis AT-GS950/8
364 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #119 background imageLoading...
Page #119 background image
AlliedWare Plus Version 2.1.2 Management Software Web Browser User’s Guide
119
Figure 38. STP and VLAN Fragmentation with Untagged Ports
You can avoid this problem by connecting the switches using tagged
instead of untagged ports when you plan to have STP or RSTP enabled
on your network. If each port connecting the two bridges is a tagged
member of all three VLANs, then traffic for each of the VLANs can still flow
through one the data links if the other two are blocked by Spanning Tree.
The second and third data links act as redundant links in case the primary,
unblocked data link becomes disabled. See Figure 39 for an example of
this solution.

Table of Contents

Other manuals for Allied Telesis AT-GS950/8

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Allied Telesis AT-GS950/8 and is the answer not in the manual?

Allied Telesis AT-GS950/8 Specifications

General IconGeneral
Ports8 x 10/100/1000BASE-T
Switching Capacity16 Gbps
Forwarding Rate11.9 Mpps
MAC Address Table Size8K
Power SupplyInternal AC power supply
Operating Temperature0°C to 40°C (32°F to 104°F)
Uplink Ports2 x 1000BASE-X SFP
Jumbo Frame Support9K bytes
Dimensions440 x 44 mm
Storage Temperature-40 to 70 °C
Humidity10% to 90% non-condensing

Related product manuals