AT-GS950/8 Web Interface User Guide
319
Configuration
File Download
To download an AT-S107 configuration file onto the switch, perform the
following procedure:
1. Enter the name of the configuration file in the field next to the Config
File Name parameter.
2. Select the Download button to download a configuration file onto the
switch.
If you are downloading a configuration file, the file will be
implemented immediately after download. A short interruption in
network service will be experienced while the new configuration file
is loaded.
The Results page will be displayed indicating that the file has been
successfully downloaded. See Figure 114 on page 317.
3. Click on the “Return to previous page” link.
To Next Page
Loading...
