Allied Telesis XS900MX Series - Chapter 7: Stacking with the Default Trunk Ports

91
Chapter 7
Stacking with the Default Trunk Ports
This chapter contains the following procedures:
 “Introduction” on page 92
 “Cabling the Default 15/S1 and 16/S2 Trunk Ports” on page 93
 “Powering On the Switches Individually” on page 94
 “Powering On the Switches Simultaneously” on page 96
 “Verifying the Stack” on page 98
 “Setting the Priority Numbers” on page 99
 “Monitoring the Initialization Processes” on page 101