0180036-J0 Rev E Page 14
In accordance with FCC requirements, we provide the following statement as specified in the FCC
guidelines for conformance to Part 15, Class B:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications to this equipment not expressly described in this manual could void the
FCC compliance.
Environmental
Operating
Temperature:
-40 to 70°C standard @ 2000m
Storage Temperature: -40 to +80°C standard (-40 to 185°F)
Humidity: 5% to 95% non-condensing
Elevation: -500 to +2000m
(-1640 to 6562ft.)
Hardware Specifications
CXC HP
CPU: ARM Cortex A8
RAM: 256MB
Flash: 256MB
Display: 480 x 272 pixel color LCD
Front Panel Controls: Recessed reset button, touchscreen LCD, Home button
Table 2: Specifications: 3RU Rack Mount CXC HP (Continued) (Sheet 2 of 4)
Cordex Controller Panel/Rack Mount
To Next Page
Loading...
Need help?
General