0180036-J0 Rev E Page 19
6 Mounting Options
The CXC HP controller has been designed as a compact modular controller offering to provide
maximum flexibility for various mounting options. Modular, external I/O peripherals allow for additional
flexibility with mounting provisions for the entire control system
6.1 Rack Mount
A 3U high panel is available for 19/23" rack mount applications. The rack mount panel provides flush
mounting for a CXC HP controller and rear mounting for one or two ADIO peripherals. Standard
mounting positions are provided for future ADIO peripheral mounting options. The rack mount panel
may also be configured with a Redundant Input Power Module for utilizing redundant input feeds to
power the controller and up to two ADIO peripherals.
The rack mount panel provides front accessibility to all controller and I/O connection points.
Figure 12: CXC HP 3RU Rack Mount Panel
6.2 DIN Rail Mount
The CXC HP, the L-ADIO, 6I-ADIO, RIPM, can all be mounted standalone onto DIN rails. This option
permits wall mounting and allows for other unique mounting applications.
To Next Page
Loading...
Need help?
General