Additional information
135
En
• You can't use a USB cable to connect the unit to an iPhone or iPad
with a Lightning port, or an Android device with a Micro USB Type-B
port. You can connect these types of devices via Bluetooth instead.
Bluetooth connection cannot be established. / Bluetooth
connection is interrupted.
• If devices generating electromagnetic waves in the 2.4 GHz band
(such as a microwave oven, wireless LAN or another Bluetooth
device) are located nearby, move them away from the unit or stop
using them.
• If you're using DJ software*
1
on your mobile device when the unit is
being powered by your PC/Mac, don't start the DJ software*
2
on the
PC/Mac. If you start the DJ software on your PC/Mac, close the DJ
software, then turn the unit off and on again.
*
1
DJ software on the mobile device: rekordbox for iOS/Android, djay
for iOS/Android
*
2
DJ software on the PC/Mac: rekordbox for Mac/Windows, Serato
DJ Lite, djay Pro for Mac/Windows
• If your mobile device is far away, move it closer to the unit. If there is
a wall, obstacle, etc. which may be interrupting the connection, move
your mobile device or the unit.
Sound
Sound isn’t output, is too quiet, or is distorted.
• Set the channel fader, crossfader, and [ (master level)] knob to the
correct positions. See: Playing a track (page 38) (page 61) (page 79)
(page 103) (page 117)
• Connect the cables properly. See: Connections (page 26)
• Clean the terminals and plugs before connecting the cables to the
unit.
• If sound is distorted, change the buffer size for your DJ software.
To Next Page
Loading...
