Additional information
140
En
Serato DJ Lite virtual deck isn’t displayed. (Practice mode is
displayed.)
• Connect the supplied USB cable correctly. See: Connections
(page 26)
• Update Serato DJ Lite to the latest version. See: Installing Serato DJ
Lite (page 97)
Fader Start doesn’t work.
• Set a temporary cue.
• Use the Utilities mode to activate Fader Start. See: Fader Start
(page 129)
BPM isn’t displayed./SYNC and Auto Loop don’t work.
• Click the gear icon next to the [Analyze Files] button, mark the [Set
BPM] checkbox, then analyze the track. For details on how to
analyze a track, see the Serato DJ Lite software manual.
BPM is not displayed correctly.
• Change the BPM analysis range and analyze the track again. If it still
doesn’t work, manually set the BPM.
The crossfader doesn't work.
• Cancel [Disable] in the crossfader settings in Serato DJ Lite.
Others
Indicator flashes and the unit doesn't work correctly.
• If the unit doesn't work correctly or won't turn on, disconnect the
cable from the USB port of the unit, and connect it again after a while.
If the problem still occurs, contact the AlphaTheta Support team or
ask your retailer to repair/exchange the unit.
To Next Page
Loading...
