djay for iOS/Android
63
En
Monitoring with headphones when the unit is connected
to a mobile device via USB
When your mobile device is connected to the unit with a USB cable,
you can monitor with headphones from the [ (headphones)] output
terminal on the unit.
This section explains how to play sound from deck 1 (left) as an
example.
1 Connect your headphones to the [ (headphones)] output
terminal on the unit.
2 Turn the [ (headphones level)] knob fully counterclockwise.
3 Press the headphones [CUE] button for channel 1.
4 Turn the [ (headphones level)] knob.
Adjust the headphones volume to a level you’re happy with.
Monitoring with headphones when the unit is connected
to a mobile device via Bluetooth
This section explains how to play sound from deck 1 (left) as an
example.
1 Connect a split cable (not supplied) to your mobile device.
The split cable is for splitting sound from the stereo headphones jack to the left
and right channels.
2 Connect the speaker to the left channel of the split cable and
headphones to the right channel.
The [ (master)] output terminal and [ (headphones)] output terminal are
not used.
3 Tap at the top of the djay main screen, and tap .
To Next Page
Loading...
