djay for iOS/Android
64
En
4 Enable the split function on the settings screen.
• When using a split cable (not supplied) to output the master sound and
headphones sound, enable the split function.
djay for iOS
Set on [Settings] > [Audio Decive Setup] > [Pre-Cueing] > [Split Output].
djay for Android
Set on [Settings] > [Split Output].
5 Press the headphones [CUE] button of channel 1 on the unit.
6 Adjust the volume on the settings screen.
Adjust the headphones volume to a level you’re happy with.
djay for iOS
Adjust on [Settings] > [Audio Decive Setup] > [Pre-Cueing] > [Split
Output].
djay for Android
Adjust on [Settings] > [Split Output].
If stereo sound doesn't output correctly when using the
Android device
If you set [Android MONO/STEREO] to [STEREO], it may not connect
correctly and the stereo sound may not output normally. In this case,
set [Android MONO/STEREO] to [MONO].
Read: Changing the settings (page 128)
Turning off the unit
Disconnect the USB cable to turn off the unit.
To Next Page
Loading...
