• When you want to choose one item, press OK key again to go to the setting.
• After you have finished with this item, press OK key again to confirm and/or to move to another item.
• To change items, always use UP or DOWN keys.
• If you want to quit the setting mode at any time, press C key.
The settings of different items are shown in detail as follows:
3.1.2.1 Change Language
To change the language setting perform the following actions:
• When the LCD displays SELECT LANGUAGE, press OK key once.
LCD will show Dutch (default setting).
• Use UP or DOWN key to select among the languages for English / Dutch / French / German.
3.1.2.2 Change Date/Time
To change the date and/or time, perform the following actions:
• When the LCD displays: DATE/TIME, press OK key once.
The year digits will flash.
• Use UP or DOWN key to change the year (Step is 1), then press OK key to confirm, and move to the setting of the
hour.
• Repeat this operation to set the minute, day, and month by turn.
• The LCD will automatically display the corresponding day of the week.
If a FSK format caller ID signal is received, the current month, date and time display will be updated (while the year
remains unchanged).
3.1.2.3 Change LCD Contrast
To change the display contrast, perform the following actions:
• When the LCD displays: CONTRAST ADJUST, press OK key.
• Use UP or DOWN key to select among 5 different contrast levels the one that you prefer.
Note The default setting is 3.
3.1.2.4 Set Flash
To adjust the flash setting, perform the following actions:
• When the LCD displays SET FLASH, press OK key.
• Use UP or DOWN key to select the flash time: 100ms, 120ms, 300ms, 600ms.
• Press OK key to confirm, or C key to exit.
3.1.2.5 Input phone Book Record
To insert a new number in the phone, perform the following actions:
• When the LCD displays: PHONEBOOK INPUT, press OK key once.
• Input the telephone number.
• Press OK key again to confirm the number.
• Input the name.
Note Use C key to correct.
• When finished, press OK key again to confirm.
• To exit the operation, press C key.
36 | Operating of telephones
To Next Page
Loading...