3.4 Operation of dA24 telephone
3.4.1 Visualization
Figure 21: dA24 buttons
Note the description below is for the default key assignment.
3.4.2 Programming
The dA24 telephone can be programmed in the programming mode. To go into the programming mode, push-and-hold
buttons 1 and 9 and then lift the handset (high acknowledgements 1 time).
Enter the PIN (high acknowledgements 2 time). You are now in the programming mode.
Now can as desired programming, up to the telephone handset be made. A successful programming is signaled with a
high tone, a false programming with a deep tone.
44 | Operating of telephones
To Next Page
Loading...