Alphatron AlphaConnect Classic - Edit Phone Book Record; Activate Baby-Call; Operation at On-Hook State; Receiving Incoming FSK & DTMF Caller ID

3.1.2.6 Edit Phone Book record
To edit a phone number, perform the following actions:
• When the LCD displays: PHONEBOOK EDIT, press OK key once.
• Input the first character of name.
• Pressing OK key, will show the corresponding telephone number.
• If no character input, press UP or DOWN key to select the record that you want to edit.
• The cursor will be flashing on the last digit of the number by pressing OK key.
• Press C key to backspace the number and press OK key to confirm.
• The cursor will be flashing on the first digit of the name.
• Press C key to backspace, press OK key to confirm.
• To exit the operation, press C key.
3.1.2.7 Activate Baby-call
To activate the baby-call, perform the following actions:
• When the LCD displays BABYCALL, press OK key once.
The LCD will display BABYCALL OFF (default).
• Use UP or DOWN key to turn it on.
• Press OK key to confirm.
• After inputting the BABYCALL number, press OK key to confirm.
Once BABYCALL is turning on, the LCD will display BABYCALL ON in idle display.
3.1.3 Operation at on-hook state
3.1.3.1 Receiving incoming FSK & DTMF caller ID
When receiving a phone call, the LCD will display the phone number together with the information of name, date, time,
and the number if user had applied for the Caller ID service.
• A new number will carry a “NEW” icon,
• A repeated number will carry a “REP” icon.
• A message waiting will carry a # icon.
• A private call (when the caller prefers his/her number to be hidden) will display “PRIVATE CALL “.
• A call out of service will display “OUT OF AREA”.
• An incorrect incoming signal will display “NOT AVAILABLE”.
When the receiving phone call is a FSK format caller ID signal, the current month, date, and time display will be updated
(while the year remains unchanged).
If there is no information from exchange, the name shown on the LCD will be the same as in the phone book.
3.1.3.2 Checking incoming caller ID
User can use UP or DOWN key to view the information of the incoming calls including phone number, date, and time.
3.1.3.3 Re-dialing an incoming caller ID
For a local call, just press the SPEAKER key when the caller’s number is on display.
3.1.3.4 Checking outgoing calls
User can use REDIAL key to view the outgoing numbers and duration of each call. To re-dial, press SPEAKER key or
pick-up HANDSET directly.
37 | Operating of telephones