Alphatron AlphaConnect Classic - Hands-Free; Push-To-Talk; Using Handset; Using Headset

4.3.3.1 Hands-free
Perform the following steps to answer a call, in hands-free mode with the standalone hands-free only communication
station:
1. Press the hands-free key
2. Conduct the conversation in hands-free
3. Terminate by pressing the hands-free key
4.3.3.2 Push-to-talk
Perform the following steps to answer a call, in push-to-talk mode with the standalone hands-free only communication
station:
1. Press the push-to-talk key
2. Conduct the conversation using the push-to-talk key whenever speaking
3. Terminate by pressing the hands-free key
4.3.3.3 Using handset
Perform the following steps to answer a call with a handset:
1. When a call comes in, lift handset from its cradle
2. Conduct the conversation
3. Terminate call by replacing handset
4.3.3.4 Using headset
Perform the following steps to answer a call with a headset:
1. Press the push-to-talk button of the headset or
Press F1 for more than 1 second
2. Conduct the conversation
3. Terminate call by pressing the hands-free key
4.3.3.5 Direct-in
If the station received a direct in call, it automatically turns into hands free and the conversation can begin without any
hands on.
4.3.3.6 Terminating a call
All calls are terminated either by hanging up the handset, pressing the speaker button or automatically by the Alphatron
exchange system.
4.3.3.7 Push-to-talk
When operating in a noisy environment, it can be convenient to control own microphone, so noise and disturbing sounds
will not affect the hands-free switching. When a call is started in hands-free, it can be turned into push-to-talk by pressing
the push-to-talk key, and hands-free can be regained by giving the push-to-talk key a short push. The display will show
the mode currently in use.
4.3.3.8 Switching from handset to hands-free
A conversation can be transferred between the conversation handset modes, using either hands-free, push-to-talk, or
handset. The principle is that the last active device is the one being used. For switching from headset or handset to
hands-free it is necessary to pass via push-to-talk mode by first pressing the push-to-talk key and after that entering
hands-free by giving the push-to-talk key a short push. This is because when in conversation, pressing the hands-free
key means terminating the call.
55 | Operation of communication stations