Alphatron AlphaConnect Classic - Key Assignment; Speed-Dialing-Numbers and Short-Dialing-Numbers

3.4.2.2 Key assignment
Keys can be programmed for different functions.
Function Code Key No. Default setting
Memory Dialing 21
013 (Key ‘A’),
014 (Key ‘B’),
015 (Key ‘C’),
016 (Key ‘R’),
017 (Key ‘Left’) (additional key option),
018 (Key ‘Right’) (additional key option)
015
Mute 22 013 – 018 013
Receiver Amplification 4x + 3dB 23 013 – 018 014
Switch over Headset 24 013 – 018 -
Line Ground/Flash 25 013 – 018 016
Speed Dialing No. 1-4 71-74 013 – 018 -
Short Dialing 30 013 – 018 -
Erase of the Key Occupation 28 013 – 018 -
Reset (to default settings) 29 255 -
3.4.2.3 Speed-dialing-numbers and short-dialing-numbers
4x speed-dialing-numbers and 10x short-dialing-numbers can be programmed.
To program speed-dialing-numbers and short-dialing-numbers, the telephone must be in the programming mode.
To program a speed-dialing-number or short-dialing-numbers;
1. Enter the code (successful programming is signaled with a high tone, a false programming with a low tone)
2. Enter the desired number
3. Press the ‘A’ key (successful programming is signaled with a high tone, a false programming with a low tone)
The speed dialing numbers can only be overwritten, and cannot be deleted. The short dialing numbers can be
overwritten and deleted.
Function Code Key No. Default setting
Speed Dialing 1–4 61-64
max. 22
e.g.: 112
-
Short Dialing 0–9 50-59 -
Short Dialing Erase 0–9 60 -
46 | Operating of telephones