EasyManua.ls Logo

Alto-Shaam 1200-TH/III

Alto-Shaam 1200-TH/III
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
O & C M A N U A L 1 2 0 0 - T H / I I I M AR I N E
P G . 16
PRESET Keys Lock and Unlock
PRESET Keys A through H can be locked in order to
prevent storing, altering or erasing a program.
To lock the PRESET Keys, press and hold the "I" Key
until the oven beeps. Release the I key. The
green indicator on the "I" key will illuminate.
Oven PRESET Keys A through H are now locked.
Note: Only the oven PRESET keys A through H are
affected by this lock-out in order to also allow
the oven to be used with the unprogrammed
Cook, Probe, or Hold modes.
To unlock the PRESET Keys, press and hold the
CANCEL Key along with the "I" Key until you hear a
brief beep. Release all keys. The green indicator on
the "I" key will extinguish. The oven preset keys are
now unlocked.
Fahrenheit or Celsius Selection
With the control in the off mode,
press and hold the UP ARROW Key
until the display toggles between
Fahrenheit and Celsius. After each
change the button must be released.
The display must clear before the
procedure can be repeated.
Control Panel Lock and Unlock
The control panel can be locked at any time in order
to prevent inadvertent or accidental setting changes.
To lock the control panel, press and hold the UP ARROW
Key and then press the ON/OFF Key.
You will hear a brief beep and the panel lock
indicator will illuminate. Release all keys. The
oven's control panel is now locked.
Note: The control panel is now fully locked with
the exception of the ON/OFF Key and ARROW
keys. You will be unable to turn the oven
control off at this point.
To unlock the control panel, press and hold the
DOWN ARROW Key and then press the ON/OFF Key.
You will hear two brief beeps and the panel lock
indicator will extinguish. Release all keys. The
panel is now unlocked and ready for normal use.
Beeper Volume Selection
With the control in the off mode,
press and hold the DOWN ARROW Key
until the display shows one of the 4
volume levels (0 being OFF or the
lowest, and 3 being the highest).
After each change, the button must be
released and the display must clear
before the procedure can be repeated
to select a different volume level.
L
ock
Indicator
EFGHI CANCEL
Preset
Lock
O P E R A T I N G I N S T R U C T I O N S
U S E R O P T I O N S

Other manuals for Alto-Shaam 1200-TH/III

Related product manuals