COMBITHERM INSTALLATION AND MAINTENANCE MANUAL #6004/18
PG. 11
COMBITHERM® ELECTRONIC CONTROL OPERATION
Cooking Programs (CONTINUED)
Retherm Program (212° to 482°F/100° to 250°C)
Press Retherm Program Key and indicator light will appear.
Press Temperature Key. Last set cook temperature is displayed.
To reset the cook temperature from the previous operation, press the
Up and Down Arrow Keys to change the value shown in the display.
Press the Time Key. The display will indicate the last set time.
Change the set time by pressing the Up and Down Arrow Keys.
Press the Start Key. The Fan LED will be illuminated throughout the
entire cooking process. The Steam indicator light illuminates
periodically whenever the oven is producing steam. The Convection
indicator light illuminates whenever the oven is producing heat. The
Main display will indicate time remaining. A buzzer will sound for
one minute signaling the end of the program.
Cooking with Continuous Time
Select cooking program desired.
Press Temperature Key. Last set cook temperature is displayed.
To reset the cook temperature from the previous operation, press the
Up and Down Arrow Keys to change the value shown in the display.
Press and hold Timer Key for one (1) second until "---" is displayed.
Press the Start/Stop Key to begin cooking.
Press the Start/Stop Key to stop the cooking process when done.
To recall oven temperature while the oven is operating:
Recall Set Temperature: Press Temperature Key.
The main display will indicate the set cook temperature for
three (3) seconds.
Recall Actual Temperature: Press and hold the Temperature Key
for five (5) seconds. Display will then indicate the actual temperature
while you continue to press the temperature key.
To change set cook temperature while the oven is operating:
The Main display will indicate time remaining.
Press Temperature Key. The main display will indicate the set cook
temperature.
To reset the cook temperature, press the Up and Down Arrow Keys to
change the value shown in the display.
To recall set time while the oven is operating:
The Main display will indicate time remaining.
Press Time Key. The main display will indicate the set time for three
(3) seconds.
To change set time while the oven is operating:
The Main display will show time remaining.
Change the remaining time by pressing the Up/Down Arrows.
To Next Page
Loading...
Need help?
General