INSTALLATION
Del uxe Control C ook & Ho l d ▪ Opera tor’s Manual ▪ MN- 4 6708 ▪ Re v 1 ▪ 11/20
36
Continued from previous page
4. Remove the screws retaining the circuit breakers a. Connect the wires to
the circuit breakers
b.
Re-install the circuit breakers with the screws c.
Adjust the length of the cord. Install and tighten the cord grip nut d.
5. Re-install the top panel.
Result The electrical wiring is now connected.
To Next Page
Loading...
