INSTALLATION
Rot iss erie ▪ O p era tor’ s Ma n u al ▪ M N- 3940 4 ▪ Re v 1 ▪ 1 /1 9
31
How to Install the Liquid Cleaner
Before you begin
Procedure
To install the liquid cleaner, do the following.
Step Action
1. Mount the cleaner support tray on the left exterior panel of the oven. Slide
the slotted openings on the cleaner support tray
a over the mounting
studs.
The cleaner support tray holds a 2-1/2-gallon (9.5 liter) bottle. The cleaner
support tray measures 10-1/2" x 7-3/4" (267mm x 194mm).
2. Place the liquid cleaner bottle b inside the support tray.
3. Pull the cleaner cap and tubing assembly c from the rear of the oven and
screw the cleaner cap onto the liquid cleaner bottle.
4. Position the cleaner cap so that the tubing assembly is not kinked after the
cleaner cap is tightened.
The liquid cleaner is automatically pumped through the system during
each liquid cleaning cycle.
Result The liquid cleaner is now installed.
WARNING: Burn hazard.
Wear protective gloves, protective clothing, eye protection, and
face protection when handling oven cleaner.
To Next Page
Loading...
