OPERATION
Rot iss erie ▪ O p era tor’ s Ma n u al ▪ M N- 3940 4 ▪ Re v 1 ▪ 1 /1 9
41
How to Load the Spits
Before you begin Make sure:
▪ The oven is turned on.
▪ The oven has completed preheating.
▪ You have food products ready to be cooked.
Standard angled
V-spits
To load standard angled V-spits, do the following.
Step Action
1. Insert whole chickens with the legs facing the square end of the spit.
Load three (3) 3-1/2 lb (1,6 kg) chickens per spit for a maximum capacity of
21 whole chickens or load four (4) 2-1/2 lb (1,1kg) chickens for a maximum
capacity of 28 whole chickens.
2. Insert the two-prong, square end a into the two holes b on the drive disk.
3. Insert the tapered, ridged-prong end c into the top hole d on the opposite
side.
Continued on next page
NOTE: When loading less than maximum capacity,
chickens must be staggered evenly on the spits.
To Next Page
Loading...
