INSTALLATION
Rot iss erie ▪ O p era tor’ s Ma n u al ▪ M N- 3940 4 ▪ Re v 1 ▪ 1 /1 9
33
Continued from previous page
4. Loosen the radial nut d on the grease collection container union.
Insert the taped fitting on the grease collection hose into the union fitting
and turn until tight.
5. Tighten the radial nut on the grease collection container.
6. Place the hose holder bracket e, if supplied, onto the pins on the side of the
oven.
7. Place the grease collection container in an easily-accessed location.
If you have purchased a Mobile Grease Collection Cart f, roll it into place
next to the oven and apply the caster brake.
Result The grease collection system is now installed.
To Next Page
Loading...
