OPERATION
Rot iss erie ▪ O p era tor’ s Ma n u al ▪ M N- 3940 4 ▪ Re v 1 ▪ 1 /1 9
57
Continued from previous page
3. Insert the USB drive into the port c.
4. Touch the download new software icon c for the full oven update.
▪ To update only the interface board, touch the interface board icon d.
▪ To update only the control board, touch the control board icon e.
The screen indicates when the update is complete.
5. Touch the home icon to return to the home screen.
6. Remove the USB drive.
Result The oven’s software has been updated.
NOTE: After the software has been completed, the oven
may automatically initiate a shut down and reboot
sequence if required.
To Next Page
Loading...
