MAINTENANCE
Rot iss erie ▪ O p era tor’ s Ma n u al ▪ M N- 3940 4 ▪ Re v 1 ▪ 1 /1 9
81
Continued from previous page
7. Clean hard deposits with a plastic scouring pad, if necessary.
8. Clean grease deposits accumulated in the area surrounding the convection
element and fan blade using a damp sponge and a plastic scouring pad.
9. Re-install the fan panel.
10. Run a wash cycle.
Result The convection fan box is now clean.
NOTICE
Use caution to avoid bending the convection
element or the blade.
To Next Page
Loading...
