Need help?Do you have a question about the Alunar M508 and is the answer not in the manual?
General| Brand | Alunar |
|---|---|
| Model | M508 |
| Category | 3D Printers |
| Language | English |
Instructions on how to open the printer box and inspect its contents.
Procedure to check all included parts against the packing list.
Identifies the key components and layout of the 3D printer.
Detailed instructions for assembling the main frame of the printer.
Guide for assembling the Y-axis components and the hotbed.
Instructions for assembling the Z-axis and X-axis motion systems.
Steps for assembling the extruder and hot-end components.
Guide for installing the LCD screen and control interface.
Instructions for connecting the power supply and mainboard.
Guide for assembling the filament holder and rack.
Initial checks after powering on the printer to ensure basic functionality.
Procedures for calibrating the hotbed for optimal print adhesion.
Instructions for loading and unloading filament, both during and before printing.
Understanding the printer's menu system and preparing for print jobs.
Adjusting printer settings for optimal performance during and before printing.
Steps to select and start print jobs stored on an SD card.
Instructions for preparing and printing files directly from an SD card using Cura.
Steps for connecting the printer to a computer via USB for direct control.
Solutions for the common 'MINTEMP' error related to thermistor connections.
Troubleshooting problems with the LCD screen and menu navigation button.
Diagnosing and fixing common print problems like filament extrusion and model dislocation.
To Next Page
