PS: Please visit our site if you would like to get more information on 3D printer: http://www.alunar.net
.
Motor drum in-phase of X axis X axis Belt
1. Settle way of Dislocation for X direction: Check if Motor drum in-phase of X axis is loose or if the X axis
belt is too tight or loose;
2. Settle way of Dislocation for Y direction: Check if Motor drum in-phase Y axis is loose or if the Y axis belt
is too tight or loose.
3. Settle way of Dislocation for X &Y direction: Check if Motor drum in-phase X & Y axis is loose or if the X
&Y axis belt is too tight or loose.
To Next Page
