Operating Instructions DC-xx13 and M31xx
961-00060 rev9 4/25
1 General Information
Information about safety regulations, symbols, copyrights, protection rights,
usage location conditions can be found in the back section of these operating
instructions.
Please read this information carefully before using these operating instructions.
These operating instructions should help you familiarize yourself with the system and
take advantage of its application possibilities when used as directed.
It contains important notes to help operate the unit safely, properly, and economically.
Observing the notes will help avoid risks, decrease repair costs and down times, and
enhance reliability and the service life of the unit.
It is a rule: Safety first!
Warning
Incorrect or inappropriate configuration, installation, settings, handling or use can cause
mechanical, electrical or thermal hazards, which may result in serious damage or injury.
Ensure the correct execution of these points and follow the respective notes in the
operating instructions.
Danger
Do not put the system into operation before you have read the operating instructions!
Danger
Persons with cardiac pacemakers and metallic implants are prohibited from
approaching to within a radius of at least 5 m of welding equipment!
Crushing Hazard
There is a risk of crushing during the adjustment movement due to closing electrodes,
stops for limiting adjustment or stroke movement and the stop on the basic pincers unit
for limiting floating movement.
Warning
This Class A welding equipment is not supposed to be used in living quarters, where
the power supply is carried out by a public low voltage supply.
There it can be difficult to ensure electromagnetic compatibility because of conducted or
radiated disturbances.
Warning
Restrictions on use environment conditions
Use this equipment in an environment without conductive dust. If conductive dust
enters into equipment, it may cause failure, electric shock or ignition. If using
equipment in such environment, consult Amada Weld Tech.
Warning
To Next Page
Loading...
