Amano OPUS-7000 Series - Mounting Diagram; Mounting Instructions

© Copyright 2014 Amano McGann, Inc. OPUS7000_Installation_10032014 16
OPUS-7000 Installation Manual
1.10 Mounting Diagram
1.
10.1 Mounting Instructions
1. O
pen the Paystation door
2. Remove the Paystation mounting base from the Paystation by unbolting the
mounting bolts at the bottom of the device
3. The mounting base will detach from the Paystation.
4. Position the Paystation mounting base on the mounting surface and mark the
location of the four mounting holes.
5. Using the marked locations, drill the four mounting holes and bolt the
m
ounting base to the mounting surface.
6. Position the Paystation on top of the mounting base and open the Paystation
door.
7. Secure the Paystation to the mounting base using the four mounting bolts.