© Copyright 2014 Amano McGann, Inc. OPUS7000_Installation_10032014 24
OPUS-7000 Installation Manual
2.8 Installing the Receipt Paper.
1. Open the Paystation door.
2. Power the Paystation ON.
3. Pull out the receipt printer drawer.
4. Place the receipt paper roller into the receipt paper spool.
5. Insert both roller and paper into the receipt drawer behind the receipt printer
6. Place the roller ends in the diagonal rails.
7. Once the receipt roll is in place, feed the end of the receipt paper beneath the
receipt tension bar and into the back of the receipt printer. The receipt printer
automatically grabs the paper after the proper sensor is triggered.
[Fig. 2.8A]
[Fig. 2.8B] Receipt paper and roller
To Next Page
Loading...
